Connect with us

Homeplug mixing

Discussion in 'Electronic Design' started by Dirk Bruere at NeoPax, Sep 11, 2008.

Scroll to continue with content
  1. Can two different types of Homeplug devices be mixed ie will a couple
    of 85Mb Turbos conflict with a couple of 200Mb AVs? I want to use the
    high speed one for normal Net style activities, and use the lower
    speed one to pass around miscellaneous low speed serial data, not TCP/
    IP or UDP.

  2. Got it:

    "HomePlug AV (200mbs) can coexist but will not inter-operate with the
    HP 1.0 and 1.0 Turbo standards. This means you can have one set of HP
    1.0 units and 1 set of AV units but they can't see each others kit.
    The manufacturers claim there is no drop in performance when mixing
    these but tests (on Tom's Hardware and SmallNetBuilder) indicate that
    performance can drop as much as 58%."

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day