Connect with us

Homemade 'security'

Discussion in 'General Electronics Discussion' started by sigmacrisis, Jun 8, 2012.

Scroll to continue with content
  1. sigmacrisis

    sigmacrisis

    1
    0
    Aug 19, 2009
    Hi all,

    I started working on a project that involves following:

    • ATmega 328p-u - for detecting motion from Parallax PIR Sensor and sending a signal via Bluetooth.
    • Parallax PIR Sensor
    • Bluetooth module

    The ATmega micro-controller has been programmed to send "HIGH" when the motion signal is triggered. I plan to have a simple C++ program monitor (/dev/rfcomm0 in linux) for any message ("HIGH"). This will then send a command to capture video from a camcorder for about 30 seconds.

    Thoughts? Seems pretty elementary, but I am still learning. Thanks in advance.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-