Connect with us

Home & Office Convection Reflow Oven

Discussion in 'General Electronics Discussion' started by Alvin Blanco Mioten, Jun 26, 2014.

Scroll to continue with content
  1. Alvin Blanco Mioten

    Alvin Blanco Mioten

    Jun 26, 2014
    Good Day,

    Once every year, I make something new. This year I have started designing a Home & Office Convection Reflow Oven, and while on the process of designing it, I realized that I had to make a control panel. The control panel would be using an ARM® Processor, and it would have to control a 3.5" Touchscreen 262K colors TFT display, 2 pieces of a Type K Thermistor, and a Through Hole Mount Relay (contact load of 110~220vac). All of these summed up also has to be cost efficient. Thanks in advance to whom may be responding to this thread. ( Note: If someone is able to help me design and program the circuit fully, I fully pledge to send a Home & Office Convection Reflow Oven for him/her no matter if it would be internationally shipped. )
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day