Connect with us

Home Made SmartPhone PowerBank

Discussion in 'General Electronics Discussion' started by Ravindu Prabash, Feb 2, 2017.

Scroll to continue with content
  1. Ravindu Prabash

    Ravindu Prabash

    2
    0
    Feb 2, 2017
    I want to make a powerbank using a 7.2V 2500mAh rechargeable battery pack to charge my HUAWEI smartphone with 2000mAh 3.8V battery.Is it possible and effective? and How?
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    10,023
    2,136
    Nov 17, 2011
    You can find a lot of information searching for "build your own power bank" on the internet.

    The gist of it is that your power bank needs to have a voltage regulator to create a 5V output on a USB port. You can then use the standard USB charge cable to charge your smartphone.
    You will also need a charge controller to be able to charge the batttery pack within your power bank from e.g. a mains power source.
    Possible? Yes, see above.
    Effective? Yes, if you use a switch mode voltage regulator. A linear regulator could be used here, too, but with less efficiency.
     
    Ravindu Prabash likes this.
  3. Ravindu Prabash

    Ravindu Prabash

    2
    0
    Feb 2, 2017
    ThankYou
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-