Connect with us

HOME AUTOMATION USING PHONE (DTMF TOUCH-TONE)

Discussion in 'General Electronics Discussion' started by vinodquilon, Mar 31, 2010.

Scroll to continue with content
  1. vinodquilon

    vinodquilon

    15
    0
    Jan 10, 2010
    Here I am presenting my final mini-project setup.
    See the attachment in this forum or the link...

    http://www.scribd.com/doc/29233455

    I express my sincere thanks to all forum members for there great support
    without whom this project wouldn't have been a reality.

    Still I am welcoming new ideas to improve my final circuit.
     
  2. vinodquilon

    vinodquilon

    15
    0
    Jan 10, 2010
    7805 ic labels are reversed, I will clear it.

    at board 3 there should be 4.7K replaced with 470 Ohm and a 1K preceding all LEDs.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-