Connect with us

High Votage Silicone.

Discussion in 'Electronic Repair' started by Dani, Nov 2, 2006.

Scroll to continue with content
  1. Dani

    Dani Guest

    When repairing rear projection T.V., high voltage 2nd anodes, what type
    of silicone
    do you guys use to seal the anode cap? Do you have a part number? I
    have used a
    few different types, & no call backs, but I want to ensure the high
    voltage won't arc!
    Thanks, Dani.
  2. David Naylor

    David Naylor Guest

    i use stardard run of the mill ge silicine sealant from autozone or
    walmart, just let it dry 24 hours before you fire up the set and you
    will be all set, i even sealed up a leaking spliter on an old rca projo
    and it is still running after 4 years
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day