Connect with us

high power relay to computer circuit.

Discussion in 'Electronic Basics' started by hashira, Jun 18, 2007.

Scroll to continue with content
  1. hashira

    hashira Guest

    I'm trying to design an interface circuit between a power relay switch
    outputing 24v to a ADC PCI card.
    When the switch is activated a 0V pulse is generated. (This circuit is
    part of a system that mesures the usage of a (baseball) batting

    1M(ohm) 1M(ohm) Ground
    24v ---------vvvvvv-----------+-------------vvvvvv----------------|l||
    |V| Diode
    AD converter

    This circuit is very simple and does not have protection or any
    debouncing functionality.

    Its been a long time since I touched electronics so If anyone has any
    ideas for a more effcient circuit, I would be greatful if you could
    send it to

    Thank you.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Electronics Point Logo
Continue to site
Quote of the day