Connect with us

hi

Discussion in 'Troubleshooting and Repair' started by spongebob, Aug 26, 2013.

Scroll to continue with content
  1. spongebob

    spongebob

    2
    0
    Aug 26, 2013
    I have hanns g lcd monitor I need to change some transistors but they don't have markings on them so not sure which ones to get help :(
     
  2. davenn

    davenn Moderator

    13,619
    1,882
    Sep 5, 2009
    hi there
    welcome to the forums :)

    lots more info would be helpful

    what exactly is the make and model of the monitor ?
    why do you want to change them ?
    if you think they are faulty ... why ? what tests have you done to establish that ?

    cheers
    Dave
    what are the transistors you want to change ?
     
  3. spongebob

    spongebob

    2
    0
    Aug 26, 2013
    thanks for quick reply ive tested transistors and they are reading 0.1 when they should be reading .4 to .6 the problem I have is when I turn on monitor green light stays on but picture goes black after about 10 seconds I will also mention I have tested them out of circuit has well and still get same reading


    Hanns G 24.6" Widescreen LCD 1080P 2ms 2x HDMI 1x VGA HDCP HH251HPB
     
  4. davenn

    davenn Moderator

    13,619
    1,882
    Sep 5, 2009
    OK that's a start

    you still haven't told me what the transistors are .... their part number

    Dave
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-