Connect with us

HELP!

Discussion in 'Microcontrollers, Programming and IoT' started by cems, Jun 25, 2021.

Scroll to continue with content
  1. cems

    cems

    3
    0
    Jun 25, 2021
    We designed a PCB with stm32f030c8t6. We soldered the PCB and tried to upload the code. Power has gone to the stm32f030c8t6 successfully but when we arranged a pin as a gpio output it wasn't high.
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    11,533
    2,656
    Nov 17, 2011
    Schematic?
    Code?
    Programming tool?
    Was programming successful or did you get any error messages?
    Power alone is an insufficient indicator. Does the clock generator work? Are all fuses burnt correctly?
     
  3. cems

    cems

    3
    0
    Jun 25, 2021
    We didn't get any error messages for codes. We are using cubeid in c. Clock generator doesn't work. We couldn't upload the code
     
  4. Harald Kapp

    Harald Kapp Moderator Moderator

    11,533
    2,656
    Nov 17, 2011
    I meant error messages from the programmer.
    you need to get it working. Without clock you can't ipload code.
     
  5. cems

    cems

    3
    0
    Jun 25, 2021
    we solved the problem. the boot pin circuit was wrong
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-