Connect with us

help with unknow smd part

Discussion in 'Datasheets, Manuals and Component Identification' started by Jeffpepin, Dec 21, 2012.

Scroll to continue with content
  1. Jeffpepin

    Jeffpepin

    13
    0
    Nov 15, 2012
    Hi all !

    i'm on a ACL phillips tv with no picture but sound . and im on the T-con board
    ive rooted the main power input come 12V from wire , one side of this componment i get 12V . other side get only 1,2Volt , . seems only 1.2V volt pass trought this piece .
    it look like a fuse . the only value i get is 22M ohms

    thanks

    the bottom side look also have a crack from 1 to other pole ..

    any help will be very appreciated !
    thanks
     

    Attached Files:

    Last edited: Dec 21, 2012
  2. CocaCola

    CocaCola

    3,635
    5
    Apr 7, 2012
  3. Jeffpepin

    Jeffpepin

    13
    0
    Nov 15, 2012
  4. Jeffpepin

    Jeffpepin

    13
    0
    Nov 15, 2012
    Just Replaced with 0ohms smd jumper ,seems this T-CON board have 2 type of fuses in serie

    The tv is Fully operationnal now thanks you for your response coca-cola
    hope that will help some people who's not necessary want ''buy new' board' when it possible to fix it for free :)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-