Connect with us

Help with Sony STR D611 AV receiver

Discussion in 'Troubleshooting and Repair' started by Leftycrusher9, Apr 22, 2012.

Scroll to continue with content
  1. Leftycrusher9


    Apr 22, 2012
    Hello, I am by no means an electronics expert. I would not even begin to pretend I was one. I have a Sony STR D611 AV receiver which I have had in storage for several years in its original packaging. When I last boxed it up, it was functioning fine but when I took it back out and fired it up, it immediately went into PROTECT mode. It has nothing to do with the speaker wire connections because it does it with speaker wires connected and unconnected. I took some advice and removed the cover and cleaned it thoroughly with compressed air to no avail. Any advice on a solution would be appreciated. Would hate to scrap this piece without knowing it could be something very simple. Thanks in advance.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day