Connect with us

help with panasonic 32" geometry

Discussion in 'Electronic Repair' started by Porkviolence, Dec 4, 2005.

Scroll to continue with content
  1. Porkviolence

    Porkviolence Guest

    am i able to fix the vertical geometry while in the service mode? I am
    able to access service mode but do no know which codes would need to be
    adjusted. There is a menu A, B, C, P, S, and X. Any help would be great.
    Thank you

    Jason

    Panasonic CT-32G6E - 2001
     
  2. Guest

    You have vertical size and centering available in the service mode on
    that ultra low end model in Panasonics line.

    If the vertical geometry is actually off, then the vertical circuit
    needs repaired, probably failing capacitors.
     
  3. Porkviolence

    Porkviolence Guest

    do you happen to know what settings need to be alters to fize the vertacal
    size?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-