Maker Pro
Maker Pro

help with identifying a component

vinnie111

Dec 22, 2010
2
Joined
Dec 22, 2010
Messages
2
hi folks i wonder if anyone could help identifiying a component out of a power supply which 240volts go into it and it kicks out between 1 and 12 volts which is ajustable via dial.

the part which blown had 3 prongs on the bottom of it then is black with a piece of metal above with a hole,,

it has this wrote on it in this order H316
top224y
24104a
phil
ideally i would like to know what this part does and if i can source it locally from somewhere like maplins, or a alternate part they sell,as there codes are different
many thanks
vinnie
 

Resqueline

Jul 31, 2009
2,848
Joined
Jul 31, 2009
Messages
2,848
Whoa, 1 hour and 10 minutes and you're already getting impatient... Hehe...
Just google TOP224 (with or without the Y) and you'll get a quarter of a million hits. Please get back to us if you have more questions than those answered by doing that.
 
Top