Connect with us

Help with a schematic question.

Discussion in 'Electronic Basics' started by Navid Naghdi, Sep 6, 2004.

Scroll to continue with content
  1. Navid Naghdi

    Navid Naghdi Guest

    Some tips will be appreciated here from the following question:

    A rocket being prepared for launch has two crewmembers, each of whom
    has a two-position switch, one position marked 'hold' and the other
    marked 'go'. Draw a circuit so that:

    (a) - A hold light comes on when either crew member has their
    switch in the 'hold' position.
    (b) - A 'go' light comes on only if both crewmembers have their
    switch in the 'go' position.
     
  2. Randy Day

    Randy Day Guest

    <sigh> Is it that time of year already?

    This ain't alt.get.your.homework.done.for.free, son.

    Crack open your textbook, show us *your* design and
    we'll critique it...
     
  3. the Wiz

    the Wiz Guest

    Sounds like you need to review the concepts of series and parallel...

    More about me: http://www.jecarter.com/
    VB3/VB6/C/PowerBasic source code: http://www.jecarter.com/programs.html
    Freeware for the Palm with NS Basic source code: http://nsb.jecarter.com
    Drivers for Pablo graphics tablet and JamCam cameras: http://home.earthlink.net/~mwbt/
    Email here: http://www.jecarter.com/contactme.htm
     
  4. Which professor assigned this as your homework?

    This is not a very difficult problem. I'm not sure why you're asking for
    help.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-