Maker Pro
Maker Pro

Help to identify inductor

H

Henry

Jan 1, 1970
0
J

John Popelish

Jan 1, 1970
0
Henry said:
Does anyone know what type of inductors these are what value they might be?



http://reactivecomputers.gotdns.com/Inductor length - 1 cm.JPG

http://reactivecomputers.gotdns.com/Inductor width - 6 mm.JPG



As you'll see from the pictures it is 1 cm long by 6 mm wide. The wire
comes out on each side of the inductor and passes through the ferrite core a
total of 5 times.



Thanks in advance for your help.





Henry

GSE-Reactive.com

My email is listed on the site if you wish to contact me directly.

They look similar to the 6 hole beads sold by Fair-Rite.
Look at page 79 of:
http://www.fair-rite.com/newfair/pdf/fr_catalog-14thed_rev3.pdf#page=1
 
Hi

i think it is a bit difficult to say the value of the inductor shown in
the picture unless you have its part number

Ranga reddy
 
Top