Connect with us

HELP. Temperature sensor

Discussion in 'CAD' started by Babich, May 2, 2004.

Scroll to continue with content
  1. Babich

    Babich Guest

    We made the temperature sensor with DS1621 and we have problem reading
    temperature. It always displays temperature of -60 C (-76 F). (both of
    them). We used following shematic
    http://www.electronics-lab.com/projects/pc/010/

    Please help us!!!

    Sorry on my bad english
     
  2. vic

    vic Guest

    Did you follow exactly the procedure described in the datasheet ?
    1) Write config word
    2) Initiate conversion
    3) Read temperature registers

    vic
     
  3. the originalwon't asnwer your question,
    I made the PCB and it only works in windows and not in linux.

    I have once made it work in linux system and I have lost the setting and
    could no longer made it work again.

    IT is funny project. do not try this at home
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-