Connect with us

Help! Push-on Terminal

Discussion in 'Troubleshooting and Repair' started by Jess17, Nov 2, 2016.

Scroll to continue with content
  1. Jess17

    Jess17

    2
    0
    Nov 2, 2016
    Oh boy. I'm trying to replace my oven's control board, but I can't figure out how to remove this wire! I learned quite a bit about electronics repair from my dad growing up, so this one is really frustrating me. Is here a tool I need?

    Please help!
    IMG_4710.JPG IMG_4711.JPG
     
  2. Arouse1973

    Arouse1973 Adam

    5,164
    1,087
    Dec 18, 2013
    See the little tab in the middle of the crimp. Prise it away carefully and pull the terminal off. There is a little pip on the tab that locks into a hole on the PCB connector. They can be very tight to get off sometimes
    Thanks
    Adam
     
    Jess17 likes this.
  3. Jess17

    Jess17

    2
    0
    Nov 2, 2016
    Thanks!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-