Connect with us

HELP pls with Magnetic Linear Encoder Reading Head - 5 Micron Resolution

Discussion in 'General Electronics Discussion' started by vizion, Aug 2, 2011.

Scroll to continue with content
  1. vizion

    vizion

    12
    0
    Aug 2, 2011
    Hi
    I would like to make a home brew a Magnetic Linear Encoder Reading Head -
    with 5 Micron Resolution for a home brew robotics project. I need a number of them. These things cost an arm and a leg from commercial suppliers.

    For an example of commercial offerings see:
    http://www.machine-dro.co.uk/magnetic-linear-encoder-reading-head-5-micron-resolution.html these work with tapes such as the Part No: DRO-MG-TP-05-HA from the same site.

    The tapes are cheap enough but its the heads that cost a lot.

    Anyone have any ideas how to build these things? I do not know how to begin designing these things but would be capable of writing driver software to support them once I know how they work.

    Thanks in advance for any help.

    David
     
    Last edited: Aug 2, 2011
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-