Maker Pro
Maker Pro

Help please choosing transmitter/reciever pair

E

Eric R Snow

Jan 1, 1970
0
Greetings Group,
This question may be better placed on the radio group and I'll post
there too. The question: I am looking for a a transmitter/reciever
pair to use for transmitting data 20 feet. The reason for the radio
interest is to avoid cables. I've been to the Maxim and Linx websites.
It seems like the Linx devices won't work because I think I need to
transmit two data streams. The data would be coming from a chinese
digital scale. The pinout for the scale is at this link:
http://shumatech.com/support/chinese_scales.htm
The solution to the transmitter reciever combo must be low cost, low
power consumption, and small size. The antenna needs to be flat and
enclosed in the transmitter case. Please, if anyone has any
suggestions, or can tell me what to look for, I'd really appreciate
it.
Thanks,
Eric R Snow
 
A

Active8

Jan 1, 1970
0
Greetings Group,
This question may be better placed on the radio group and I'll post
there too. The question: I am looking for a a transmitter/reciever
pair to use for transmitting data 20 feet. The reason for the radio
interest is to avoid cables. I've been to the Maxim and Linx websites.
It seems like the Linx devices won't work because I think I need to
transmit two data streams. The data would be coming from a chinese
digital scale. The pinout for the scale is at this link:
http://shumatech.com/support/chinese_scales.htm
The solution to the transmitter reciever combo must be low cost, low
power consumption, and small size. The antenna needs to be flat and
enclosed in the transmitter case. Please, if anyone has any
suggestions, or can tell me what to look for, I'd really appreciate
it.
Thanks,
Eric R Snow

Eh, the scale's baud rate is too fast, but maybe these modules have
a faster one or maybe you can slow down the scale's data clock.
www.radiotronix.com Mouser or Digi-Key carries them. Around $4 US
per
 
Top