Connect with us

help open source project

Discussion in 'Electronic Design' started by RESO / Claude GUTH, Jun 1, 2005.

Scroll to continue with content
  1. Hi everybody,

    I'm working on an open source project :
    involving hardware and software development. All stuff (schematics, PCB,
    firmware, software) published and free for personal use.

    To design engine control and com/nav tranceiver I need to do some test. If
    you have hardware that you no longer need, please contact me. I'm looking
    specially for :

    Microchip dsPic evaluation board (any)
    Microchip PIC 18F2455 evaluation board
    Cypress Peppermint evaluation board or CY22393/4/5 chip
    Cypress MiniProg1
    SA612 evaluation board (downconverter 108-137 Mhz to 10.7 MHz)

    Thanks for help,
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day