Maker Pro
Maker Pro

help on cd pickup

M

mikelim

Jan 1, 1970
0
Hi,


Wonder if you can kindly offer me some information on CD pickup with
regards to:


1. pinout


2. the structure, especially optics ( I have observed that the pickup
structure differs from one model to another, is it possible for you
to list or provide source of optics information of the cd pickup along
with the product model, etc).


Thank you very much for your aid rendered and time. I have read
through sam laser faq but it is too generalised.


Yours sincerely,
Yoong Ping, Lim
 
S

Sam Goldwasser

Jan 1, 1970
0
mikelim said:
Hi,


Wonder if you can kindly offer me some information on CD pickup with
regards to:


1. pinout


2. the structure, especially optics ( I have observed that the pickup
structure differs from one model to another, is it possible for you
to list or provide source of optics information of the cd pickup along
with the product model, etc).
Thank you very much for your aid rendered and time. I have read
through sam laser faq but it is too generalised.

It's not the Laser FAQ that might be of use but the CD player repair
guide, since it describes in more detail the functions of the various
parts of a CD pickup.

If you have a specific model in mind, you should list it here. Someone
may have a schematic of the player using it which would then have the
pinout.

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.
 
M

mikelim

Jan 1, 1970
0
Hi there,

I have dismanted a few old cdrom drive.

I feel it will be easier for me to perhaps ask what schematics you have
and I will buy or get the cd player or drive model than the other way
around.

Please advise.

Thank you for your time.
 
S

sofie

Jan 1, 1970
0
mikelim:

mikelim said:
Hi there,
I have dismanted a few old cdrom drive.

What are makes and models of the "few old cdrom drives" that you have?
I feel it will be easier for me to perhaps ask what schematics you have
and I will buy or get the cd player or drive model than the other way
around.

most certainly not easier.... reply post with the make and models.
 
Top