Connect with us

Help needed with vintage tv sentinel model 424

Discussion in 'Electronic Repair' started by Patrick Garber, May 13, 2007.

Scroll to continue with content
  1. BH

    BH Guest

    You will probably need the schematic. Probably available from Howard W
    Sams in Indy. Just Google. The part in question is a resistor.
    Normally they fail because something else has failed ann cause too
    much current to flow say like a shorted cap.

    Bruce
     

  2. Service data listed as availible in Sams Photofact 124-9

    http://www.samswebsite.com/


    --
    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-