Connect with us

Help needed for programming of microcontrollers and associated chips..

Discussion in 'Electronic Basics' started by adam, Jan 8, 2006.

Scroll to continue with content
  1. adam

    adam Guest

    Hi Group,
    We wish to know about programming the microcontroller and associated
    chips.
    These are the chips we have decided to use:
    AT89C52/AT89S52: MICROCONTROLLER
    DS1307: RTC
    MAX232/MAX485: LEVEL CONVERTER
    AT24C1024: SERIAL EEPROM
    4051B: 8:1 ANALOG MUX
    LM339: COMPARATOR

    1. What are the different stages that go into programming from start to
    end?
    2. What are the various software requirements at each stage?
    3. We have searched and got some routines and codes from the internet.
    But these are for 8051 or for other derivatives. Is there some website
    from where basic codes like read/write/erase of EEPROM, Programming of
    RTC and Reading RTC, etc can be available.
    4.Lastly we are using RS232c cable for PC interface. We wish to display
    a few details like pin number and the real time clock n the PC in the
    simplest way. Please suggest ways to go about it. some have suggested
    Visual Basic. Are VB codes for such application availalbe on the
    internet?

    We wait for positive response.
    Thanking you and with best regards,
    Adam Mashraqui.
    (on behalf of the group)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-