Connect with us

help my Christmas Village is missing it's power supply. What do I use?

Reply to Thread

Discussion in 'Troubleshooting and Repair' started by [email protected], Dec 4, 2011.

Scroll to continue with content
  1. Dec 4, 2011 #1
    salvagegal@hotmail.com

    [email protected]

    1
    0
    Dec 4, 2011
    My Christmas Village is missing it's power supply. I pulled the motor and light source from the church and it reads as follows...synchronous motor AC6V 50/60/Hz 5r/min 1.202w; The light reads MR11 6V5W. Each building in this village has the same connector end. What can I buy to light up the buildings in the village? Thanks so much!
     
  2. Dec 4, 2011 #2
    Resqueline

    Resqueline

    2,848
    2
    Jul 31, 2009
    So it seems you need a 6V transformer, rated at 6.2W (or 1A) per building that has a light & a motor.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Power Supply for Mr Christmas Santas Marching Band - uk

  2. It's broke...

  3. Missing cord, irregular size, help?

  4. Christmas Decoration Repair

  5. Replacing Christmas light bulbs.

  6. Multicolored Christmas ornaments repair

  7. Laser printer missing colour issue

  8. Pre-lit Christmas Tree Lights

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-