Maker Pro
Maker Pro

Help, My batteies won't charge

Hi Guys & Gals;

Hi everyone, I am the guy who is having fun, while experimenting with
solar and my christmas LED lights. My (Cheepo) Canadian tire inverter
cut off both my batteries ( I thought that I would charge one while I
used the other for my LED lights) at 10.5 volts. Unfortunatly, neither
of my batteries will charge, and I don't know what to do to get them
charging again (and I don't want to revert to an ordinary battery
charger).

Please help

Glenn

PS. I hope that I haven't ruined my batteries, a 10.5 volt cut off
seems awfully low.
 
G

George Ghio

Jan 1, 1970
0
Hi Guys & Gals;

Hi everyone, I am the guy who is having fun, while experimenting with
solar and my christmas LED lights. My (Cheepo) Canadian tire inverter
cut off both my batteries ( I thought that I would charge one while I
used the other for my LED lights) at 10.5 volts. Unfortunatly, neither
of my batteries will charge, and I don't know what to do to get them
charging again (and I don't want to revert to an ordinary battery
charger).

Please help

Glenn

PS. I hope that I haven't ruined my batteries, a 10.5 volt cut off
seems awfully low.

How many Ah are these batteries. Remember, what you take out must be put
back plus 10%.
 
Hi (again) Guys & Gals;

My batteries are still only 1/2 of a volt above where they were when I
started charging them a few days ago, so I will this time charge them
using the grid (I really do need to put my panels in a better and
perminent position). Next time I wont cheep out on equipment (eg: my
inverter); but I am having alot of fun (and learning).

Thanks for all the groovey advice
Glenn
 
Top