Connect with us

help me understand this crossover

Discussion in 'General Electronics Discussion' started by mbailey, Nov 10, 2008.

Scroll to continue with content
  1. mbailey

    mbailey

    1
    0
    Nov 10, 2008
    I've got an old MTI Rotophaser (Which is basically like the top half of a Leslie cabinet) That I am trying to restore. Cant find any info on the web about it. Any way its basically a high Freq. driver. It has a built in x-over that is supposed to send the high freq. to the driver & the lows out to an ext. cab. My problem is I don't know much about x-overs & not sure where to connect signal in and lows out to cab. I've made a simple drawing showing what i got. If someone would take a look & help me out I would be sincerely Appreciative
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-