Connect with us

Help in epson lx300 control

Discussion in 'Electronic Design' started by demonio, Feb 10, 2007.

  1. demonio

    demonio Guest

    Dear Sir´s

    First of all, thaks for your time.


    How can I control a epson lx300 printer, for label printing, position,
    etc


    thaks

    Fabio Bairros
    msn:
    skype: fabiobairros
     

  2. Try a computer. It works for everyone else.


    --
    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
     
  3. john jardine

    john jardine Guest

    Dear Sir´s

    First of all, thaks for your time.


    How can I control a epson lx300 printer, for label printing, position,
    etc


    thaks

    Fabio Bairros
    msn:
    skype: fabiobairros

    [Pleasing to see they still make human friendly printers].
    You do it by using an "Escape code". That is, you send chr$(027) to the
    printer and every character after that is interpreted by the printer as a
    special 'control code' and not just as a character to print.

    The codes you can send allow full control over the printer hardware and
    style of printing, upto the level of controlling the individual printhead
    needle patterns (pixel printing).


    http://esupport.epson-europe.com/FileDownload.aspx?lng=en-GB&ID=18162&data=0
    E213EE7FF2F604E751918C354F6565A48077A0225B7E6DEAF950F3FEAFDE866

    PDF has the Epson ESC control code list.
    john
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-