Maker Pro
Maker Pro

Help Identifying Component

N

Nelson

Jan 1, 1970
0
Four lead round IC controlling the fan motor in a hair drier. About 1/2
inch diameter black cylinder, 1/8 inch high. Markings are:

+
G1
2W202M
8650

I'm thinking a bridge rectifier to drive the small DC fan motor.

Probably should just buy a new hair dryer, but I like to know how
things work :)
 
F

Franc Zabkar

Jan 1, 1970
0
Four lead round IC controlling the fan motor in a hair drier. About 1/2
inch diameter black cylinder, 1/8 inch high. Markings are:

+
G1
2W202M
8650

I'm thinking a bridge rectifier to drive the small DC fan motor.

Probably should just buy a new hair dryer, but I like to know how
things work :)

Assuming you meant "2W02M" rather than "2W202M", then your device is a
200V, 2A, silicon bridge rectifier:

http://www.datasheetarchive.com/pdf-datasheets/Datasheets-35/DSA-696459.pdf

The "8650" could be a YYWW date code, and "G1" may in fact be "GI"
(General Instruments).

- Franc Zabkar
 
E

Eeyore

Jan 1, 1970
0
Nelson said:
Four lead round IC controlling the fan motor in a hair drier. About 1/2
inch diameter black cylinder, 1/8 inch high. Markings are:

+
G1
2W202M
8650

I'm thinking a bridge rectifier to drive the small DC fan motor.

Probably should just buy a new hair dryer, but I like to know how
things work :)

I'm guessing it's it's similar to a WO2M. Doesn't hurt to put ina higher
voltage rated part such as a WO4M. G1 is probably GI ( General Instruments
) so you could check but I think they've changed their name now.

8650 is merely a date code.

Graham
 
R

Ross Herbert

Jan 1, 1970
0
On Sun, 19 Oct 2008 20:16:02 +0100, Eeyore

:
:
:Franc Zabkar wrote:
:
:> On Sat, 18 Oct 2008 14:32:36 -0400, Nelson <[email protected]> put
:> finger to keyboard and composed:
:>
:> >Four lead round IC controlling the fan motor in a hair drier. About 1/2
:> >inch diameter black cylinder, 1/8 inch high. Markings are:
:> >
:> > +
:> > G1
:> > 2W202M
:> > 8650
:> >
:> >I'm thinking a bridge rectifier to drive the small DC fan motor.
:> >
:> >Probably should just buy a new hair dryer, but I like to know how
:> >things work :)
:>
:> Assuming you meant "2W02M" rather than "2W202M", then your device is a
:> 200V, 2A, silicon bridge rectifier:
:>
:> http://www.datasheetarchive.com/pdf-datasheets/Datasheets-35/DSA-696459.pdf
:
:I didn't know they did a 2A bridge in that style ! Could be useful.
:
:Graham

Also made by othe manfs such as EDI
http://www.edidiodes.com/pdf/Commercial/W.pdf
 
Top