Connect with us

help identify component

Discussion in 'Troubleshooting and Repair' started by snapman, Apr 2, 2013.

Scroll to continue with content
  1. snapman


    Apr 2, 2013
    My cheap boss wants me to try and repair approx 50-100 400w, 600w and 1000w electronic ballasts to use for waranty replacements for customers(the orig manufacture just went out of business, leaving all customers without replacement units).

    I have started taking apart ballast and have found 4 matching components which at least 1 to 4 of them have clearly gone bad.

    Need help identify them. I have attached a picture of one. I think it maybe a 230-250v 10a fuse.

    Thank you for any help


    Attached Files:

  2. davenn

    davenn Moderator

    Sep 5, 2009
    yup its a 10A fuse dont see any voltage ratingtho unless there's something written on the other side ??

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day