Connect with us

Help finding right cable/connector

Discussion in 'General Electronics Discussion' started by jack12345, Jun 3, 2014.

Scroll to continue with content
  1. jack12345


    Jun 3, 2014
    So I have a DT70H-16-26PN ( circular connector in place as a feedthrough in a vacuum system, and I need to find a connector/ cable to connect to that. The part on the inside of the vacuum is solder cups, and the outside is pins (26). I need something to connect to that to break out into wires.
  2. shrtrnd


    Jan 15, 2010
    What am I missing? Are you just asking for a mating connector for the Detoronics connector?
    Can't the manufacturer recommend the mating connector that you need? (Or have a website spec sheet that does it?).
    Or am I misunderstanding your question?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day