Maker Pro
Maker Pro

Help finding parts

shorteddiode

Mar 23, 2011
41
Joined
Mar 23, 2011
Messages
41
I have a Tenma 72-6820 100Mhz scope that I knocked out channel one on by not having the unit I was testing plugged into an isolation transformer. (Yeh I know) Can't find a schematic so I comparied voltage on the two channels and I found the voltage to be off on two SMD parts. I need to locate a Y34= 2SA1462 and a K52= 2SK508. Any idea where to find them.. I have found so far are sites where you have to request a quote for parts, and I have not heard back. Any good cross reference for these?
 

shorteddiode

Mar 23, 2011
41
Joined
Mar 23, 2011
Messages
41
Thanks Harald, found the 2Sk508 at your link but didn't see the 2SA1462
 
Last edited:

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
My experience in SMD parts is the vast majority are now made in China, and nobody
wants to sell one or two because they're so inexpensive. Suppliers usually want you
to buy in quantity.
Any possibility of getting the parts directly from TENMA, or some repair shop that
repairs TENMA gear?
 
Top