Connect with us

HELP DT9205A MULTIMETER

Discussion in 'Troubleshooting and Repair' started by Jackdu7889, Feb 13, 2015.

Scroll to continue with content
  1. Jackdu7889

    Jackdu7889

    1
    0
    Feb 13, 2015
    Hi guys i have a problem with my multimeter DT9205A in controller after when i open it :(

    1-qY9lDz.jpg

    2-0nHIbB.jpg

    3-zgWH35.jpg

    [Edited by moderator to reduce image size -- KrisBlueNZ]
     
    Last edited by a moderator: Feb 13, 2015
  2. shrtrnd

    shrtrnd

    3,714
    469
    Jan 15, 2010
    Good luck trying to realign those contacts on the switchplate. I never did get the one I took apart back together right.
    I suppose you can do it if you have a lot of patience and a lot of time.
    What was wrong with the meter that caused you to disassemble it?
    If you have a circuit problem instead of a contact problem,it may not be worth the effort.
     
    zam likes this.
  3. zam

    zam

    4
    0
    May 22, 2017
    1496680986878689167632.jpg
     
  4. zam

    zam

    4
    0
    May 22, 2017
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-