Maker Pro
Maker Pro

Help: Datasheet Acronyms

RBeersJr

Feb 4, 2014
10
Joined
Feb 4, 2014
Messages
10
I work on a ship, and internet or cell signal can sketchy, I have been Googling datasheets and guides to datasheets, and I've come across another setback, I need a acronym guide to go with the datasheet tutorial so that I can understand the data sheets.
Does anyone know of a an Acronym glossary / reference manual?
 

davenn

Moderator
Sep 5, 2009
14,260
Joined
Sep 5, 2009
Messages
14,260
I work on a ship, and internet or cell signal can sketchy, I have been Googling datasheets and guides to datasheets, and I've come across another setback, I need a acronym guide to go with the datasheet tutorial so that I can understand the data sheets.
Does anyone know of a an Acronym glossary / reference manual?

hi there
welcome

no I don't know of one specifically with info you have provided so far

please give some examples


Dave
 

RBeersJr

Feb 4, 2014
10
Joined
Feb 4, 2014
Messages
10
Sorry Gentalmen; I was vague now that I think about my post. I am an electrician on an industrial ship, semiconductors was a theoretical class better than 20 years ago. I'm playing catch up.
Attached is a datasheet for an cd4001/cd4011 IC.
Most of the acronyms I can figure out. I did learn Vss is ground, took a few days. But what does the SS represent. And what is the difference between VCC & VDD, and what do they represent?
Ive been watching a lot of youtube at home and searching for glossaries.
Can you enhance my search efforts?
 

Attachments

  • 2015-12-05 11.24.50.png
    2015-12-05 11.24.50.png
    625.3 KB · Views: 300
  • 2015-12-05 11.33.48.png
    2015-12-05 11.33.48.png
    675.4 KB · Views: 225

Martaine2005

May 12, 2015
4,951
Joined
May 12, 2015
Messages
4,951
Have a peek at this..here.
It all started with transistors...
Vss = voltage , source, source.
vdd = voltage, drain, drain...
vcc too.. = collector, collector
Don't forget vbe too.. But I am not allowed to mention vbe!!!!

Seriously, when at home, Google each and read..I just did, So thank you..:)

Martin
 
Top