Connect with us

Help, Creating dc motor symbol for LtSpice

Discussion in 'CAD' started by chapmjw, Feb 12, 2007.

Scroll to continue with content
  1. chapmjw

    chapmjw Guest

    I'm trying to model a dc motor and would like to convert the example
    found at:
    http://www.ecircuitcenter.com/Circuits/dc_motor_model/DCmotor_model.htm
    to a ltspice symbol and subcircuit.

    My goal is to have a symbol with two pins pos and neg as would be on a
    motor. I know the V_AMP would have to be removed.
    I'm very new to spice and don't know what steps i need to take to do
    this.
    Any help is appreciated.
    thanks
    jim
     
  2. Damir

    Damir Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-