Connect with us

Help communicating uart to servo controller via RPi

Discussion in 'Sensors and Actuators' started by Marcpi, Aug 16, 2016.

Scroll to continue with content
  1. Marcpi

    Marcpi

    1
    0
    Aug 16, 2016
    Hi everyone,
    I recently got a cheap 32ch servo controller from ebay and it has no documentation. It is the Lobot LSC-32-V1.0. it seems similar to the other ssc32 variants, and I have been trying to work with the documentation for those controllers.

    Trouble I'm having is when I send a command(standard servo command like #2P1200T1000\r\n) the controller just beeps and doesnt move the servo.

    Does anyone have any troubleshooting ideas?
     

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-