Connect with us

Help building a controller for hydraulic transmission

Discussion in 'General Electronics Discussion' started by Edenboy, Feb 20, 2015.

Thread Status:
Not open for further replies.
Scroll to continue with content
  1. Edenboy

    Edenboy

    1
    0
    Feb 20, 2015
    Hi everyone I'm new to the site and am after some help and knowledge.

    I have a hydraulic transmission which usually works from an expensive microprocessor. Unfortunately the one on mine has been stolen so I'm trying to get it up and running without.

    I need to control 2 coils which are basically forward and reverse. I believe they are 5VDC and were originally used with a pedentiometer to control different flows of oil through them. I have a PDF with some technical information http://files.danfoss.com/documents/11022666.pdf. The truck has 12v.

    If anyone could point me in the right direction of some one who could make something up or help me make something up my self it will be most appreciated.

    Thank you.
     
  2. KrisBlueNZ

    KrisBlueNZ Sadly passed away in 2015

    8,393
    1,271
    Nov 28, 2011
    Hi there and welcome to Electronics Point :)

    Unfortunately, for legal and safety reasons, it's our policy to disallow discussion of modifications to motor vehicles, so I'm closing this thread now.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Thread Status:
Not open for further replies.
Electronics Point Logo
Continue to site
Quote of the day

-