Connect with us

Heartbeat/pulse lighting effect

Discussion in 'LEDs and Optoelectronics' started by WillyD, Nov 15, 2018.

  1. WillyD


    Nov 15, 2018
    What would I need to create a heartbeat/pulse lighting effect? I want to put a red led (or any type bulb) under the gas tank/ above the cylinder head-ish area of my atv that will flash to the beat of a heart pulse. I would also like to have the pulse of the heartbeat effect coincide with the rpm of the motor. It’s a 1996 Yamaha Banshee which run an AC current to the headlights, taillights, etc but I could convert it to DC fairly easy if it would better suit whatever set-up is recommended.
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    Check this out.

    You'll have to figure out the synchronisation though.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day