Connect with us

Headphone diagnostic

Discussion in 'Troubleshooting and Repair' started by Templar3lf, Mar 9, 2017.

Scroll to continue with content
  1. Templar3lf

    Templar3lf

    1
    0
    Mar 9, 2017
    I have two pairs of the OnePlus Bullets V2 which broke in the same way (bent male aux connector), so am trying to solder new connectors onto them, but unlike any headphones I've taken apart before, these have 6 wires, and the colour coding seems arbitrary.

    I am assuming the wires are left, right, mic, and then a ground wire for each. Is there any way I can figure out what wire does what, without a multimeter?

    Edit: I have already attempted to contact OnePlus support for such information but it seems it's against their policy to supply it, likely to decrease the likelyhood of knock-off products being manufactured.
     
  2. hevans1944

    hevans1944 Hop - AC8NS

    4,606
    2,151
    Jun 21, 2012
    You don't own a multimeter? That is like trying to do carpentry without a tape measure. Buy one and all will soon be revealed.
     
    Templar3lf likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-