HC-49 Xtals - Non standard frequency

[Al Clark]

I am looking for two parallel cut HC-49 (short) crystals.

I can be flexible with the loading, but the frequencies are 26.2144 MHz &
22.5792 MHz. I am not looking for anything unusual except for the
frequency.

Do any of you have suggestions? I need about 100 pieces (US customer)


Thanks,
--
Al Clark
Danville Signal Processing, Inc.
--------------------------------------------------------------------
comp.dsp conference July 28 - Aug 1, 2004

details at http://www.danvillesignal.com/index.php?id=compdsp
email: [email protected]

Who says you can't teach an old dog a new DSP trick?

 

[Leon Heller]

I am looking for two parallel cut HC-49 (short) crystals.

I can be flexible with the loading, but the frequencies are 26.2144 MHz &
22.5792 MHz. I am not looking for anything unusual except for the
frequency.

Do any of you have suggestions? I need about 100 pieces (US customer)

Just get them made by a crystal supplier. They won't be expensive and should
just take a couple of weeks.

Leon

 

[Al Clark]

Just get them made by a crystal supplier. They won't be expensive and
should just take a couple of weeks.

Leon

I have emailed a few of the larger manufacturers, and most have not
responded. Others suggest very large minimums. Can you suggest some good
suppliers?

--
Al Clark
Danville Signal Processing, Inc.
--------------------------------------------------------------------
comp.dsp conference July 28 - Aug 1, 2004

details at http://www.danvillesignal.com/index.php?id=compdsp
email: [email protected]

Who says you can't teach an old dog a new DSP trick?

 

[Alan]

I have emailed a few of the larger manufacturers, and most have not
responded. Others suggest very large minimums. Can you suggest some good
suppliers?

You could try asking your local two way radio dealer where they get
crystals made when they want them.

Alan


++++++++++++++++++++++++++++++++++++++++++
Jenal Communications
Manufacturers and Suppliers of HF Selcall
P O Box 1108, Morley, WA, 6943
Tel: +61 8 9370 5533 Fax +61 8 9467 6146
Web Site: http://www.jenal.com
e-mail: http://www.jenal.com/?p=1
++++++++++++++++++++++++++++++++++++++++++

 

[Tim Shoppa]

I have emailed a few of the larger manufacturers, and most have not
responded. Others suggest very large minimums. Can you suggest some good
suppliers?

Two places I have used in the past, both with small orders and great
success:

International Crystal http://www.icmfg.com/
Jan Crystals http://www.jancrystals.com/

If you pick some reasonable load capacitances etc. in your initial quote
request you will speed up the purchasing process. Just saying "I don't
care" really doesn't help.

Tim.

 

[Leon Heller]

I have emailed a few of the larger manufacturers, and most have not
responded. Others suggest very large minimums. Can you suggest some good
suppliers?

Only in the UK, I'm afraid.

Leon

 

[Geo]

Only in the UK, I'm afraid.

Yeah! - that makes a change...
http://www.quartslab.com/



Geo

 

[Leon Heller]

Yeah! - that makes a change...
http://www.quartslab.com/

I use them - very good service. Don't know what they are like for 100 off,
though.

Leon