Harmon Kardon HK620 Amp

[Dynamic Dave]

Hi, I'm new to this so I hope someone out there can help. I've recentl
dug out my old Harmon Kardon HK620 Amp that has been in storage. Now
may have damaged it when taking it out of the box but for some reason
the remote control won't turn the volume knob as it prevouisly did. Th
remote works for everything else. Is there a quick fix for this?

Any help would be much appreciated.

Thanks,

Dave

 

[Arfa Daily]

Hi, I'm new to this so I hope someone out there can help. I've recently
dug out my old Harmon Kardon HK620 Amp that has been in storage. Now I
may have damaged it when taking it out of the box but for some reason,
the remote control won't turn the volume knob as it prevouisly did. The
remote works for everything else. Is there a quick fix for this?

Any help would be much appreciated.

Thanks,

Dave.

It may just be that the grease on the motor drive / gearbox assembly has
dried out. A simple check with a voltmeter across the motor connections,
whilst operating the remote vol up or vol down buttons, should tell you the
whole story. If volts are present, and the motor does not turn, then either
it is stalled because of a mechanical / lubrication problem, or the motor
itself is faulty. If there are no volts, then there is a circuitry problem,
which may well be beyond your abilities to trace, if you are not a service
engineer.

Arfa

 

[Dynamic Dave]

Thanks for the reply Arfur... I'll take a look and maybe have to take i
down to an engineers. Was a great amp, shame to have it not workin
properly.

Thanks again,

Dave.