Connect with us

Hardware architect with Cadence Alegro, OrCAD experience

Discussion in 'Electronic Design' started by vk, Feb 24, 2006.

Scroll to continue with content
  1. vk

    vk Guest

    Hi All,

    I am looking for Hardware/Software Architect to work for one of the
    project in which we have to design the box solution for one of the
    Video terminal. Hardware architect must possess strong understanding
    about the methodology for Hardware circuit design, FPGA logic analysis
    and design, verification and validation. He will be the person, who
    will write the specification and architect the system. He should be
    hands on with Cadence Alegro, OrCAD etc.

    Software Architect will be writing funcitonal specification, firmware,
    device drivers, Flash access firmware etc. He will work in close
    association with Hardware Architect to realize the system.

    This position is for India & Japan and any person living in India and
    willing to travel to Japan would be most suitable. The position is for
    long term and immediate joining is required..

    Looking forward for an early response.

    Thanks.
    Vinay
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-