Connect with us

Hard Disk LED Connector

Discussion in 'Electronic Basics' started by Scott Cadreau, Mar 18, 2006.

Scroll to continue with content
  1. I am working on a custom built case for my computer and didn't know where
    else to turn. For the power led and other led's, there is a two-pin
    connector that plugs to the motherboard. This is standard in all cases.
    Can someone tell me where I can buy the housing and "crimp connectors" for
    this application? I don't know where to look or what the connector style is


  2. Rich Webb

    Rich Webb Guest

    There are almost certainly other, similar connectors but I think that
    you're looking for Molex p/n 50-57-9002 (Digikey WM2800-ND). See the
    family in the lower left corner of this page:

    The crimp connectors are to the right.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day