Connect with us

Hands Free DIY Project

Discussion in 'Electronic Basics' started by Josh, Jan 10, 2005.

Scroll to continue with content
  1. Josh

    Josh Guest

    I would like to create an adapter which will allow the various
    "universal" hands-free cell-phone headsets on the market to also be
    used with 2-way radios.

    Specifically, I recently purchased a Giro Fuse snowboarding helmet with
    integrated TuneUps II audio system. The audio system uses a SkullCandy
    Link universal hands-free system to interface with most common
    cell-phones. There are 2 different connectors on the cable, as well as
    a microphone and a "function button". I would like to create an adapter
    which will allow me to interface with my Motorola Talkabout serious
    2-way radio (walkie-talkie).

    I have a feeling it's as simple as re-wiring the plug.

    If anyone has insight or schematics for standard cell-phone and/or
    2-way accessory port wiring diagrams and would like to help me figure
    this out then I would be greatly appreciative. I live in Seattle but we
    could do this over email too. If you can build me a prototype I'd pay
    for your time and expenses.


    Josh Brown
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day