Guessing game!

[weatherjack]

I bought a used brearboard that included a huge assortment of jumpers, leds, ic's, ect. It came with a smt soldering kit for what appears to be a led flasher and it also arrived with this... It has two plugs (one 2 pin and one 4 pin), two contact push buttons, four led (red, green, 2 white), a buzzer, and solder points for TP-cell -, TP-cell +, TP-motor -, TP-motor +. Does anyone have any ideas of what it is or how to use it? Thanks in advance for the input.

 

[MattyMatt]

Well from what I can gather, your power connections are the 2 pin header, positive and negative are labeled. I would say see if you can find a 3V and a 5V DC adapter and see if it will power the board up. Just as a note, it could require more, as it does appear to be regulated, but I try to keep the voltage low at first if there are micro controllers or chips on the board.

From the rest of things, it could be something like a programmable micro controller board for learning, like an arduino. Or it could be something already programmed.... sorry to be vague, but maybe one of the other pro's on these boards will be able to figure it out a little more definitively.

 

[(*steve*)]

I thought I replied to this a while ago. The most useful thing you could tell us is what is written on each of the 4 (I think, from memory) chips on the board.