Connect with us

GPIB utilities including HP 7470A plotter.?? help

Discussion in 'General Electronics Discussion' started by pushenupdaisys, Feb 20, 2021.

Scroll to continue with content
  1. pushenupdaisys

    pushenupdaisys

    2
    0
    Feb 20, 2021
    I'm new at this and have and 8757 scaler analyzer. I picked up the Porligix usb to gpib adapter
    that is supportive of the HP 7470a plotter, but i don't know how to get the plots to work properly,
    i see it talking the the analyzer but it comes up with a communication error, has anyone used this utility and had success.??
    and if so what setting are used in the HPIB configuration file.
     
    Last edited: Feb 20, 2021
  2. pushenupdaisys

    pushenupdaisys

    2
    0
    Feb 20, 2021
    Okay I figured it out i had the adapter on the wrong HPIB bus once i switched it i was able to wait for initiated plot.
    system,
    plot
    plot all
    and the transfer completed. and the plots look better than expected.
    cheers
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-