Connect with us

GPD-E540 retrace now visible

Discussion in 'Electronic Repair' started by mikercana1, Feb 11, 2007.

Scroll to continue with content
  1. mikercana1

    mikercana1 Guest

    I have looked for bad capacitors, cold joints, which isn't an issue.

    I think that it is an automatic adjustment (done at the factory).

    G2 voltage too high possibly.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day