Maker Pro
Maker Pro

gold plated

J

John Popelish

Jan 1, 1970
0
Is there a good reason for a lot of electronics to be gold plated?

Low contact resistance, excellent corrosion resistance and excellent
solderability. And it looks cool and high tech. ;-)
 
P

PeteS

Jan 1, 1970
0
John said:
Low contact resistance, excellent corrosion resistance and excellent
solderability.


And it looks cool and high tech. ;-)


Well, of course. That's what the audiophools want. I think if the
control buttons on a piece of audio equipment were gold plated, some
audiophool would buy it on the grounds 'it must be better' ;)

Cheers

PeteS
 
C

Chris

Jan 1, 1970
0
John said:
Low contact resistance, excellent corrosion resistance and excellent
solderability. And it looks cool and high tech. ;-)

And very low thermoelectric potentials, always a problem in precision
measurements of very low voltages.

Cheers
Chris
 
J

Jim Land

Jan 1, 1970
0
Low contact resistance, excellent corrosion resistance and excellent
solderability. And it looks cool and high tech. ;-)

And they can charge a lot more for it. ;-)
 
J

Jamie

Jan 1, 1970
0
PeteS said:
And it looks cool and high tech. ;-)


Well, of course. That's what the audiophools want. I think if the
control buttons on a piece of audio equipment were gold plated, some
audiophool would buy it on the grounds 'it must be better' ;)

Cheers

PeteS
oh, you mean like that monster wire that is 99.9999 OX free! and those
gold connectors and gold caps! ..yeah...
 
K

Ken Smith

Jan 1, 1970
0
Is there a good reason for a lot of electronics to be gold plated?

Gold has a lot of advantages. These are mostly because (A) it doesn't
corrode easily and (B) it is a soft metal.
 
M

Mark Fortune

Jan 1, 1970
0
Ken said:
Gold has a lot of advantages. These are mostly because (A) it doesn't
corrode easily and (B) it is a soft metal.

c) it's a good electrical conductor
 
P

Peter Bennett

Jan 1, 1970
0
Gold has a lot of advantages. These are mostly because (A) it doesn't
corrode easily and (B) it is a soft metal.

Those are good reasons for gold plating the _mating surfaces_ of
connectors. There is no reason (good or bad!) to gold plate the
outsides or other non-mating surfaces.



--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
 
P

Puckdropper

Jan 1, 1970
0
Those are good reasons for gold plating the _mating surfaces_ of
connectors. There is no reason (good or bad!) to gold plate the
outsides or other non-mating surfaces.

Sure, but it looks pretty in the impossible-to-open-without-destroying-it
bags.

Puckdropper
 
Top