Connect with us

Getting PCBs made

Discussion in 'PCB Layout, Design and Manufacture' started by Gadgetastic, Dec 1, 2011.

Scroll to continue with content
  1. Gadgetastic

    Gadgetastic

    27
    0
    Nov 22, 2011
    I would appreciate recommendations for where I might get one-off boards made to spec. Ideally the company would have ease of order, good turn around time, and reasonable pricing. Thanks.
     
  2. BobK

    BobK

    7,680
    1,685
    Jan 5, 2010
    I have used ExpressPCB and was very pleased. They have their own layout software which was very easy to use, or you can use other software if you choose. You can get 3 boards for as litte as $51 and they are top quality. I opted for solder mask and silk screen and 3 boards cost $75. My board was actually small enough that I put two on each board and cut them apart with my bandsaw, so I actually got 6 for $75.

    Bob
     
  3. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,362
    2,758
    Jan 21, 2010
    This is a really interesting topic actually.

    I wonder if there are any others out there who have used these services?

    There seem to be about a million of them in China and it's very hard to know anything about them other than what they say.

    Personal recommendation would go a long way...
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-