Connect with us

Genie Microcontroller and RGB Colour sensor

Discussion in 'Microcontrollers, Programming and IoT' started by conorpbarry, Feb 3, 2020.

Scroll to continue with content
  1. conorpbarry

    conorpbarry

    1
    0
    Feb 3, 2020
    Hi, I'm trying to get an Adafruit RGB Colour sensor to work with a New Wave Concepts Genie E18 board. I know the Genie board has an I2C ability but no idea how to programme it to read a colour. I can get it to read a colour using an LDR and a white LED but I'd like to get the RGB colour sensor working.

    This is the sensor I'm trying to use.
    Thanks in advance.

    https://www.rapidonline.com/Adafrui...KLWMMlzgx6XAwftQDcGvqW9H7KRrGzxcaAlyXEALw_wcB
     
  2. bertus

    bertus Moderator

    1,002
    371
    Nov 8, 2019

    Attached Files:

    Last edited: Feb 5, 2020
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-