Connect with us

Gas generator parts

Discussion in 'Electronic Repair' started by Ken G., Jun 4, 2007.

Scroll to continue with content
  1. Ken G.

    Ken G. Guest

    I was asked to fix a Power Boss gas generator model 030220 on the frame

    Inside the generator motor back near the brushes and incoming wires is a
    small circuit board with a semiconductor on it . The semicond. has a
    hole fried in it taking out the part number besides that the board is
    potted in resin .

    Is it possible to get this board ? its small and unplugs .

  2. Meat Plow

    Meat Plow Guest

    Start at and research "gas generator parts"
    #1 Offishul Ruiner of Usenet, March 2007
    #1 Usenet Asshole, March 2007
    #1 Bartlo Pset, March 13-24 2007
    #10 Most hated Usenetizen of all time
    #8 AUK Hate Machine Cog
    Pierre Salinger Memorial Hook, Line & Sinker, June 2004
  3. James Sweet

    James Sweet Guest

    Usually there will be a phone number or web address on the generator
    somewhere indicating where to call for service. Find a service center and
    order the replacement module.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day